Service Details
Ride On Mower Service
-
Full engine service including oil, filters & spark plug
- Check fuel system for contamination & flush out if required
- Check &
charge battery
- Change transmission oil where applicable
- Check condition of
all belts & tension to correct specification
- Check & inspect condition
of all bearings & pulleys
- Sharpen & balance blades
- Check & adjust
deck for correct level
- Check & adjust front wheel alignment
- Check &
inflate tyres to correct pressures
- Fully check over machine for correct
operation
- Lubricate machine where required
- Clean whole machine
- Run up &
test.
Pedestrian Cylinder Mower
-
Full Engine Service including oil, filters & spark plug
- Drain & flush out fuel system of dirt & contamination
- Remove cylinder,
regrind cylinder & bottom blade
- Check all bearings, belts & chains
- Adjust & lubricate control cables
- Fully check over machine for correct
operation
- Lubricate machine where required
- Clean whole machine
- Run up &
test.
Pedestrian Rotary Mower
-
Full Engine Service including oil, filters & spark plug
- Drain & flush out fuel system of dirt & contamination
- Sharpen &
balance blade
- Check all belts, bearings & pulleys
- Adjust & lubricate
control cables
- Fully check over machine for correct operation
- Lubricate
machine where required
- Clean whole machine
- Run up & test.
Chainsaw
-
Full Engine Service including oil, filters & spark plug
- Drain & flush out fuel system of dirt & contamination
- Sharpen blade
& redress bar
- Check carburettor & fuel system
- Retune engine
- Fully
check over machine for correct operation
- Clean whole machine
- Check all safety
controls & correct operation
- Run
up & test.
Brushcutter/Strimmer/Hedgecutter/DiscCutter/Blower
-
Full Engine Service including oil, filters & spark plug
- Check carburettor & fuel system
- Drain & flush out fuel system of dirt
& contamination
- Retune engine
- Fully check over machine for correct
operation
- Clean whole machine
- Run up & test.
Rotovator
-
Full Engine Service including oil, filters & spark plug
- Check carburettor & fuel system
- Drain & flush out fuel system of dirt
& contamination
- Check drive belts & pulleys
- Fully check over machine
for correct operation
- Clean whole machine
- Run up & test.